Sony KV-27S46 27" TV "wont power cold" Questions

...wont come on until hit hard on the back Sounds like you have a power supply problem. Could be as simple as a cold solder joint. Check the solder connections oin the power suplly area. Especially any ...

...wont come on the timmer light is on and blinking I have worked on many JVCs with similiar problems. I found in most cases the Horizontal Output Transistor was burned out or the Flyback trasformer was ...

...wont turn on,it cliicks like its coming on then nothing. Dont know spec of this model but if it has a CRT (glass tube) display rather than a LCD one, clicking at switch on is idicative of a power ...

...wont turn on Sony-KV27S46 27" TV, Chassis BA-4D, made July 1999. TV Set is dead - no picture, no sound. A relay like click is heard when the power switch is pressed. It clicks again a few seconds ...

...power to the circuit and if it's damage (leaking or swollen it wont ) do so. Are the regulator break down under a load. A shorted horizontal output transistor will power up and shutdown with in a few ...

...wont turn on when you push the power button it acts like it is going to come on but then... .won't turn on we have the same porblem. We just unplug ours and wait a couple of weeks while watching ...

...wont turn on All the fuses are ok but the horizontal output transistor only has 57 volts, sounds like a low voltage power supply problem but i'm not sure what. The voltage might be low because is ...

...wont turn on...is it worth fixing replace on the D board IC6501 IC8002 C6510 C8027 C6532 C8037 Hope this fixes you, if not then alot of other might get theirs fixed. please leave your feedback! this ...

...wont work for a couple of days. What seems to be the problem? If the display seems normal when present, you may have what is called a 'cold solder joint,' possibly in the area of the horizontal power ...

...wont. What is the problem? Standard flat screen CRT Tau series "HDTV" 1080p capable television. Fuse is accessible via the power cord opening. Looks ok. Unplugging then plugging in allows a ...