Sony KV-32FV1 32" TV "schematics back power board" Questions

schematics will give you circuit diagrammes and will have all the parts and part numbers in a list after the diagrammes. Once you find the part number you need if you then go back to ask.com then type

...schematics for your model. you can download them the following website for free, a free registration is required. Here is the link to service manual. If I was you I also would replace the resistor ...

...schematics and directions on replacing fuse.. The fuse is blown and not sure how to replace.. Symptons are black screen on power up. This is a very simple fix. I bought fuses at Radio Shack and have ...

...power supply damage.) There you go. If the board is no longer available, then option two becomes the only option on the table. Is the shop willing to repair the board and associative circuitry? If so ...

...back off, I suspect a problem on the secondary board, power supply board, any ideas as to what might be defective on this board to cause this? again I have no schematic for this model, any help would ...

...back on.(number on circuit board is thx3415).I guess it is part of the degausser. Maybe its the tube or the screen burnt out ? Device is a thermistor (thermal resistor) thermistor and a vatistor ...

...back in, and right at that moment, it does the buzzing without even turning on the power. Cracked it apart, found a resistor burst and burnt the spot on the board it was on. ohmed it out and replaced ...

...power off and back on...picture returns but may stay or fade again...have in past resoldered most of board but beleive this problem is in triac? do these sets use one on remote control power? this ...

...BACK side of the D board (just opposite the I.C. I replaced). It ohms open and is outside the capacitance range of my meter(2n to 2M)...(All measured in situ!) A wise tech would replace it IMHO. What ...

...back in, but no go. When I go to turn on the TV with the power button, the red LED blinks about 24 times and then stays lit, but nothing else happens. I have checked the horiz. output transistor and ...