Question about Sony Televison & Video
...red canon not much DC and the other 2 full of dc try to compare it again but now with a disconnected crt print beware allways on the high focusing voltage inside the tube foot !! we know its well ...
...free. Bright green raster with Flyback (retrace) lines may indicate a heater cathode short in the tube (crt) this causes a sharp increase in beam current and the power supply shuts down into standby ...
...Red, Green and Blue Video outputs. If you choose not to and want to take it in to a service center try and find one with Free Est. Notice on your screen if you have diagonal lines, if you don't, ...
Question about Sony Televison & Video
...red crt tube is geting old - lazy - failing. and would need to be replaced. allthought I'm not sure since I'm not fimiliar with this spesific model. Here seems to be the service manual. ...
...red in my tv now i dont, what do i do? If your TV is the type that has a picture tube,the picture tube itself could have gone bad. Also one of the picture tube driver circuits may have messed up. A ...
...red output transistor itself. You just open your TV, and resolder most of the suspected points, that ma have loose, by applying a little more solder. Never short circuit beteween solder points while ...
...Red, Green and Blue Video outputs. If you choose not to and want to take it in to a service center try and find one with Free Est. Notice on your screen if you have diagonal lines, if you don't, ...
Question about Curtis-Mathis Televison & Video
...red-green-blue stripes all outlined in black--tiny).What is wrong is not fixable even if the tube is replaced----the metal used in these sets for the mask contains iron which causes it to expand in ...
...red hi, Your tv has problem with the base board. you can see the base board on the picture tube neck. To see the base board you have to open your tv. The problem is dry soldering of component in the ...
Question about Sony Televison & Video
...red blinks. Hello jmdady, First I would like to say that this procedure is dangerous, and should only be done by a qualified Television Technician. With that being said here is how I would do it: 1) ...
11 questions posted
Usually answered in minutes!
1,430 Questions
874 Questions
716 Questions
647 Questions
601 Questions