Question about Panasonic Televison & Video
...circuit) - in other words, the 8 blinks means a protection code for a faulty board/module. Unfortunately, this may not be repairable at consumer level; the TV will have to go to a workshop to have ...
...circuit (automatic kine bias), the timer/standby indicator blinks for about 30 seconds then goes to the self-diagnosis function. Something is wrong with the video. Check video out, Q705, 732, 761 and ...
...quot; TV stand by light flashed 8 times and would not turn on. I took the TV to a Sony recommended tech who told me my, "D board"?, needed to be replaced. The job was going to cost close ...
Question about Philips Televison & Video
...circuit" But do not shoot the messenger, its going to need a shop, I would not recommend you opening this unit and risk a fatel shock or Death. Just the flyback transformer alone could kill you. Not ...
...8 pin IC ) feed back circuit. Never switch on TV when the IC is removed. SMPS will go un controlled and the Dc will rase beyond 200volts & DC capcitor will burst. Other IC also likely to get ...
Question about Zenith Televison & Video
...8 yrs old I wasn't real concerned, however, hoping to minimize this I just started leaving the tv on and only turning off the cable. As time has gone on the lines have crept down the screen and now ...
circuit board and removed it with ease. You can see the fuse when your unscrew and remove the small chord bracket on the rear of the set and peer down with a flashlight, but you need take the back off
108 questions posted
Usually answered in minutes!
1,430 Questions
874 Questions
716 Questions
647 Questions
601 Questions