...LED blinks-no picture or sound I was watching tv when i heard a noise eminate from the television. When I pressed the remote "on", the stand-by LED blinks and I hear a relay "click" sound, but the tv ...
Question about Haier Televison & Video
...led flashing with thump sound Hi I own a Haier 27 inch Flat screen Model: HFT27R11 Serial # 09045020c9520030 25A0396 I heard a thump thump thump out of the speakers and looked up and the screen was ...
Question about JVC Televison & Video
...led One of my neighbors gave me their broken JVC tv. When I turned it on, I got no picture or audio. There was a clicking noise and the red standby light on the front was flashing. I opened up the tv ...
...when powering up; then two days ago with a big pop it just went dead. Now: nothing, no light, no led, no sound. Opened the back, pulled out the one fuse I could find. Appears ok but smoked area on ...
Question about JVC Televison & Video
...led on front of the TV, and tv turning off by itself after a while, that indicates a fault condition. The flashing light indicates a diagnostic state called protection. When the TV goes on protection ...
...TV gets on & led also gets on continuosly (won't blink) & there should not be any smoke or sounds on main board ...this confirms you have replaced flyback without disturbing other ...
...led was blinking. (3 minutes topps it lasted after I bought a new TV). I pulled the chassis out minus the power board which I left in and checked every fuse, diode, and rectifier and found nothing ...
TV forward, I have no problems. When I sit it correctly, the picture and sound shut off, and the LED blinks. It's probably a cold solder. The silver box that the cable input plugs into seems to be the
245 questions posted
Usually answered in minutes!
1,430 Questions
874 Questions
716 Questions
647 Questions
601 Questions
