Sony FD Trinitron WEGA KV-36FS120 36" TV "crt tv circuit board pics" Questions

...TV is it on the big circuit board with all the plugs in it? If you have a pic of the board can you please send it to me at [email protected]? Thanks disconnect CRT broad from neck of picture tube ...

...is dropped the printed circuit board gets cracked, the only way to tell is to remove the back and printed circuit board and check; if not too badly damaged can be 'hard wired' across breaks and ...

...TV, BUT DID NOTHING. One of the power supply areas are most likely going intermittent. This can be from cold solder connections on the circuit boards, or from some components failing due to age. An ...

...crt tv 14" .. my problem is that when I turn on my t.v Its works fine and I can see pic but there is no tv station sound although silent mode is not activated and spekers are on but I can listen some ...

...tv turns on but there is no pic or sound. what do i do? Fault at its main digital board. Short circuited component/s at it. Contact any service technician; or the authorized service center. If you ...

...CRT circuit board has to be resoldered ....... only good tv service engineer can do this without shorting joints or damaging components..... so that silver box ( TV tuner ) is not the problem because ...

...needs a special equipment like the color pattern generator. u cannot just adjust this manually. try to inspect the crt circuit board see if there is an open resistor there. u have a luminance ...

...tv , old, model no av-48wp34....turned it on hsd sound pic everything normal , changed channel, picture went 80% black , stil have sound HI Bonnie, If you have a good picture when it's on then it ...

...circuit board. I opened it up (remove 8-10 screws and don't forget the 2 little ones holding the coax/cable connection), gently vacuumed off the circuit boards (the bottom one and the one on the back ...

...circuit boards). Does the pic blank or flicker? In either case I would say your TV is sick and that you need to see an Authorized Service Center DR. Always ask for an estimate before any repairs are ...