...flashing. TV doesn't start. Any idea what's wrong and how to fix it? numder of flasing indicate error code . so i need how many flash you can see when power on the tv using front power butten then i ...
tv wont power up but standby light flashes 9 times then stops and does the sametimg again light flashes 5 times then stops and does the sameting again and again
...9 times,, also a white line appears , and then a full white picture during all the red light blinking, then shuts off,, i hope this is enough information,, please help,, nikki Please count light ...
Question about Sony Televison & Video
...flashes nine times and now the tv will not come on I had the same problem with Sony KV-32fs120 with 9 blinks. Replaced D645 and D647 on main board with 1.5A1KV diodes from Radio Shack which did the ...
Question about Sony Televison & Video
...red light flashes 9 times but wont turn on Check if the TV is in an AV mode.Normally if I leave my TV in an AV mode with nothing plugged in, it starts flashing the red led..If no luck return ...
press the on/off button on remote or on the tv itself, the standby light flashes 9 times , goe out and cycles again for 9 times . TV will not turn on . Power board or power supply is bad. Call sony @ ...
...flashing should be a repeated count with a 2 or 3 second pause between the counts. Can you post the count here please. That will indicate the problem circuit and allow me to give you more details on ...
Question about Sony Televison & Video
9 blinks, meaning sometimes the TV comes on and other times you get flashing, then change the switching regulator on the "G" board or check connections. Make sure the regulator is -12 or -13 (negative
9 blinks, meaning sometimes the TV comes on and other times you get flashing, then change the switching regulator on the "G" board or check connections. Make sure the regulator is -12 or -13 (negative
Question about Sony Televison & Video
9 blinks, meaning sometimes the TV comes on and other times you get flashing, then change the switching regulator on the "G" board or check connections. Make sure the regulator is -12 or -13 (negative
119 questions posted
Usually answered in minutes!
1,430 Questions
874 Questions
716 Questions
647 Questions
601 Questions