...channel reception without interruption. While watching DVD the display goes black. While watching air program through hd reciever picture freezes and turns to purple duo-tone. What to do? Sounds like ...
...Channel List, turn on LNA if needed, shouldn't be. Somewhere there may be different modulations, some offset the channel a fraction and are important for channels above 13. I'm basing this on my ...
channel up. After it loads to 100%, the screen should turn black and then say no signal.. then thats your cue to hook your dvd cables, video game etc.. thats what i have to do with my HD 32 inch Sanyo
...channel it goes away but comes right back. Used to be able to get to HD channels and it would not happen, now it happens on all channels regardless of the input, DVD, Cable box, direct cable. A large ...
...turn off the cable box and hold the Guide + Info Buttons down, it will go into supported resolution setup. My TV now goes to the appropriate resolution (480i, 720p or 1080i) what ever the channel is ...
Question about Sony Televison & Video
...turn the TV on and set to a channel input and the screen will go black within just a few seconds but the tv power is still on. If you are on a tv channel and ithe screen goes black,you can select ...
...HD side of my VCR DVD Combo or S-Video.. But when connected to an Antenna Air or cable or A/V cables. When connected to AV ( Yellow red and white ) Nothing happens on either of the 3 Video in ...
...turn on and has the green 3 on the right hand corner but that is it. I took off the dvd so I only have the cable wire going into the cable box and from the cable box to the tv. It was manufactured ...
1,778 questions posted
Usually answered in minutes!
874 Questions
716 Questions
647 Questions
601 Questions
479 Questions