Sony KLV-S23A10 23 in. LCD HDTV "direct tv receiver turns itself" Questions

...Direct TV HD Receiver hooked up to it, but every time we turned it on, the TV would shut off. So we basically canceled the receiver and just used the TV to play video games. Now it TV is doing the ...

...direct. My tv turns on and off ok and worked fine before I went on vacation. Tries tv and the dish box unplug,replug it back an hour later for the tv to do a restting itself back to the factory ...

...direct TV receiver at the same time the noise is louder especially if it is on an HD channel. Sometimes it will even effect the picture if you turn them on at the same time. The TV is about 2 years ...

...TV and then it 42" LCD serial # LSPDWAK0105847 1920 x 1080 P full HD native resolution purchased in 2009 Having to unplug suggests a issue where the set is getting confused, if using any kind ...

...Direct TV. New remote control does not recognize tv,need code numbers to program itself to Mintek DTV-373-D. Any suggestions would be greatly appreciated. Turn on the TV, and the Direct TV receiver, ...

...receiver is fine. On the set itself connect a DVD directly to one of the rear inputs to see if audio that way.---if so set is likely good.Check hookup etc and in set menu look to see if speakers for ...

...Direct TV remote as well as the remote that came with the TV. Both have new batteries and the Direct TV remote works fine with the Direct TV DVR/Satallite box. However, when I go to increase/decrease ...

...direct tv receiver or not. Hi, I need model number and brand of your tv to find out possible cause of problem. Thanks. Hi, Kindly tell me the Make and Model of the TV so that i could assist you ...

...receiver box or dvd connected. If that does not work, and you keep having a flashing led on front of the TV, and tv turning off by itself after a while, that indicates a fault condition. The flashing ...

...turns in high winds. Turning it back to the original direction improves the signal strength so that the tuner works. Then go into the Menu and find the Setup or Channels sub-menu to attempt to rescan ...