Sony KDF-E55A20 55 in. LCD Television "tv faint blue picture" Questions

faint can still watch tv just very light, no blues. T'Con board fault. Replace it. If you wish to get some details; check the site linked here. Pull up older posts. Surf the site with patience. http:/

...faint black lines caused by the TV set being in 4:3 mode all the time....right at the edge of where the picture ends and the black pillars begin, we see a faint black line that never goes away and is ...

TV wont come on The television will not power on. A blue light remains on (menu light) but when you push power button there is no response. Check fuse. Is this a LCD, Plasma ect... Do you have sound? ...

...tv on and get a faint blue screen cant do anything with the remote or buttons on the set if the picture is faint its possible the back-light or mainboard maybe going out.. this problem you are having ...

...power up when I turn the unit on. Westinghouse Model LTV-32w1. No picture! Black screen. Tv has power, blue power light comes on but after 6 or 7 seconds it changes to orange. Mainboard

TV is 1.5 years old and has no picture. A faint image can be seen when a flashlight is put to the the screen. Audio is good. The blue light is on. The backlight is out most likely caused by either the

...TV in a dark room and see a faint blue light on the entire screen but no picture, there is sound. Do I need to replace the Power Supply / LED board? Thank you, Eric T'Con board fault. Replace it. If ...

...FAINT BLUE SCREEN Was the TV working before you changed the lamp out? The motor that runs the color wheel may have gone bad and that's why you only are seeing one color. Blessings, A/V Media Tech ...

...tv the blue screen that says akai appears but disappears sooner then it normally does, then i receive sound but no picture. Even when i change the source (to my ps2 or super nintendo for instance) i ...

...TV will produce a color hue relevant to what color remains in contact, looking faint and discolored. If you do find a loose cable connection, inspect the contact ends and squeeze lightly to restore a ...