Question about Mitsubishi Televison & Video
rewind tape or anything.Don't have user manual to see what that error means. E2 means: Loading motor locked in the unload direction. Usually(not always) happens with a going bad VCR tape on the rewind
Question about Televison & Video
manually for it. Start at the end of the tape and rewind a few minutes worth of recording then press 'play' and see what you get. If not successful rewind further and try again, etc,etc. Alternatively
...rewind or eject. Its a sony slv-ez715 VCR. The error code is 60681. Can anyone tell us how to get the tape out? Thanks. There schould be a release buuton on the rear of the machine. It's usually ...
Question about Philips Televison & Video
rewind and fast forward the tape for about 30 seconds. Sometimes the tape ribbon gets wound too tight or is loose. If these fail, then you have to open the unit up and clean the magnetic head manually
...Tape will not eject,rewind, FF, Play...have reviewed all troubleshooting items in manual and it still does not respond. When powered up it goes on -hit play and in a few seconds shut down...believe ...
... Tried a few tapes and am able to easly get tape out and rewind it. With cover off. this sounds like a ff/rew idler worn or dirty or a worn slack belt will need to be cleaned manually or parts ...
rewind button without hitting stop, the gears try to engage the spindel on the left without stoping and reversing (changing rotational positioning), this causes the motor to stop (this emulates a tape
Question about Sony Televison & Video
...rewind a tape, it throws the timing back out again. This is making the unit useless. What could possibly be causing this? Why would a transport control affect the loading mechanism timing? Now-a-days ...
...in. will not play or rewind - can't eject. screen reads 'LOCK' open the vcr look on the right side you will see a belt attached to a motor use your hand and manually turn the belt until the tape ...
...rewind, or fast forward (I hear what sounds like gears slipping). The tape would not eject so I had to take the top and bottom off and manually drive the eject motor to eject the tape (tape did not ...
18 questions posted
Usually answered in minutes!
1,430 Questions
874 Questions
716 Questions
647 Questions
601 Questions