Sony SLV-998HF VHS VCR "reassembling tape" Questions

Reassembling a vhs tape---lots of little internal parts and springs. where do they all go? Is there an exploded diagram for the reassembly? You do mean a TAPE? If so I suggest you take apart an old ...

erroe 02-355 02-355: Detected S reel FG during stop and Still. if there is a tape in the machine , open the cassette compartment and remove the tape manually. the tape may be broken. Reassemble the ...

Tape cassette stuck after rewinding. Will not eject. I've removed the top cover, but can't see how to release the cartridge. The gear seems locked. The rear cassette flap is still raised, but excess ...

4010a will not load a tape I have a 4010a emerson Vcr. it will not load a tape. has resistance like something is already in there. Then after a couple seconds, it shuts off. Any suggestions? Thanks ...

tape wont eject. is it a gear that needs to be replaced. what is the name of the part i would need to order to fix it It's not possible to say what needs replacing (if anything) without knowing why ...

SLV-660HV Will not load I reassembled the Sony SLV-660HV after clearing a tape problem now the tape unit will not load and I get a error code of E4 01 15. Does anyone have an idea of what that code ...

VCR tape won't eject The tape will play but will not eject. I have removed top of VCR but can't figure out what to do next to make the tape eject. When I push eject the tape appears to get re-looped ...

vcr tape stuck the tape is now stuck in the unit and will not open to any commands what can i do to fix this Hello there daniel  and thanks you for choosing fixyawell it sounds like your vcr ...

Part for VCR mechanism I had a worn capstan/drive belt on my HS-U560 VCR and replaced it. Thinking all was fixed I reassembled the mechanism and replaced the cover. Big mistake! When I loaded a tape, ...

eating tapes I insert an 8mm cassette and it starts to play for about 2 seconds and then stops. When i press the eject button the cassette comes out but the tape is strung back into the machine. I ...