eject tape Casset is stuck in VCR. I use remote control or eject button on fornt, IT won't respond. take the top off the VCR, you will see where the tape is hung up. Reach down and release the
my dsr-45 no eject cassete Hi, please follow this :-Remove the case, remove the mechanism cover, cut the mangled tape in pieces and take it out gently - you are going to have to rotate some part to ...
...eject the tapes, the casset makes it out, but is stuck because the tape is still wrapped up inside. Is this fixable? Yes with care. Simply remove the cover and with care unwrap the tape. If you must ...
...I have about a half-hour blank left on it but I can't rewind it or advance it. I can load and eject it from the VCR but it just won't run. The machine has no problem with other recordable tapes ...
My VHS tape is also stuck--tapping didn't help The tape plays 1 sec and shuts off-- same thing after I tried the tapping technique. Any hope out there??? does ur vcr have a idler wheel or gears ...
Question about Televison & Video
...eject the video once powered on and has this code RF-03 When you can open it, , try that. First unplug the VCR. Open the device and help the tape to come out. It won't be worth trying to go for a ...
i have in display error 09-020, what can i do THE CASSETE CAN NOT GET IN switch off the system and remove the power cord. while pressing eject button ON the power switch.
Question about Sanyo Televison & Video
...casset was not ejecting. It was taken out manually,but the loading motor does not stop turning Hi, thats is a mode switch and mechanism alignement problem;;; if you turn manually loading motor belt ...
JVC S-VHS VCR 2002 model Worked well until a few days ago. Display comes on briefly if switched on, and tape will thread around the head. However, the tape is then back threaded into the cassete and ...
28 questions posted
Usually answered in minutes!
1,430 Questions
874 Questions
716 Questions
647 Questions
601 Questions