Mission 702 Speaker "speakers amp" Questions

how to connect to amp red + wire goes to + on amp Left side speaker on L+ channel on amp Black - wire goes to - on amp Left side speaker on L- channel on amp Same with right speaker on R+ and R- on ...

...my hdmi stuff and cd player please help With the CLS-215 speakers, you can Bi-Amp or Bi-Wire them. Here is how to Bi-Wire and Bi-Amp Speakers: ...

...speaker. Finally connect the negative wire of the second speaker to the negative output of the amp. This will get sound from both speakers without straining your amp. This is called wiring in

...speakers what kind of amp do i need you have to purchase a amp which is also a 2 ohms, since your speaker is capable of 2 ohms yif your going to load a amp bigger than 2 ohms which is the capacity of ...

...amp + speakers. Do this, CD audio out jacks to the PRE-AMP INPUT jacks, then PRE-AMP OUT jacks to AMPLIFIER INPUTS then from AMPLIFIER to speakers, This will work similiar with any sound source unit ...

amp and speakers match at 8 ohm - still checking. Can't find ohm listing on any of the speakers. Will check amp when it comes back from the repair shop today. What would cause resistors on audio board

...arrive You can without an amp in between. They are non-powered speakers and need an amp to drive them. If you connect your laptop to a mixer, mixer to an amp, then amp to speakers THEN they will

BLOWN FUSE? JUST MY TWEETER IS WORKING. BLOWN FUSE? CAN IT BE FIXED MYSELF? If no warranty - remove amp and check sub to another amp to isolate speaker from internal amp. Either the amp blew a channel

...amp is blown? a quick test, change the speaker wires between the speakers, if the sound goes over to the other speaker the problem is in the amp. But if the problem stays with the same speaker tower ...

...amp, not the speakers. Ideally the power amp should have not greater power output then 115w. But I would stick with Amps rated up to 100w per channel. The of amp depends on quality verses money you ...