Sony SLV-N750 VHS/S-VHS playback VCR "mode switch cleaning" Questions

...Mode switch. The mode switch in a VCR tells the electronics what position the mechanism is in. Sadly if this malfunctions the VCR will do something else when say pressing play. The Mode switch can ...

...mode switch. Again this could be caused by damage in the mechanism, throwing out the timing. You see the mode switch tells the electronics what position the mechanism is in. Any damage can throw out ...

...mode switch will go of position and give faulty readings to the electronics, so they power off the video to prevent further damage. The mode switch itself can ware out or become dirty and give false ...

...mode switch with Servisol Video 40. When you fixed the carriage also, you did get put it back right, in the correct position, otherwise the VCR will think it's in the wrong mode, even if the mode ...

...mode switch. If the mode switch has gone off of it's true position, then the electronics might well think it's in rewind mode even in the off position. Sometimes it's just the switch that is faulty, ...

...mode switch is faulty or out of place. The mode switch tells the electronics which position the mechanism is in. However the contacts on it can wear out or get covered with dust and thus give a false ...

...of the gears and they are right on the money. What can I do? ref. Panasonic AG-720 either bad mode select switch or bad sensors. my bet would be bad mode switch( pull apart and clean

...mode switch. This tells the computer chip what position the VCR is in. It can go out of phase due to dirt (Just spray the Mode Switch with Servisol video 40 to cure that). Or it can go out of phase ...

...mode switch" tells the electronics of the machine what mode the VCR is in. If this switch goes wrong ie: it sends out wrong position message, the electronics powers the machine down. So your machine ...

...switch to program mode My Mitsubishi hsu-54 will not switch to program mode. When I turn TV to channel 3 and using the reomote, turn on VCR and switch to VCR, I cannot get the VCR to go to the mode ...