Sony KP-53XBR200 53" Rear Projection Television "fix projector picture dark" Questions

projector television with a dark picture can this be adjusted Your set may have one or more of the following symptoms.... *Dull looking picture *White looking picture *Halos around objects *Red/Orange

...fix? and is there anything I can clean the projectors with that is safe. If not how much would this repair run me.. The mirror should also be cleaned. but there is more adjustments that can bring up ...

...projector bulbs and play around trying to manually fix the colors, all the color seen to be good except is really dark on the picture and when i go to the menue it look realy good. Is just when a ...

...projector may just need to be cleaned. I cannot seem to get the screen off to clean the inside. I dont want to damage the screen by forcing it with possible damage. The inside does look to be needing ...

...projector TV has a problem, there is a white haze around all white color in the picture and when there are black or black shadow the darkness gets real dark. there are white halo around black or ...

Picture is OK, but colors are off and there is a blue star background that shows on dark colors. Hello, With most rear projections there is usually an alignment to do with the set up with your TV. ...

...projector TV manufactured in Sept 1998. It's been in my basement since purchased new. Recently the white areas on the screen have started looking "snowy" or "grainy". If the image is mostly dark, it ...

...fix the brightnees in my 61md10 there is a menu setting for best pix or longer lamp life. Also, turn up brightness of picture settings(different menu) Also use daylight setting, vibrant, (different ...

...projector. When you get the screen off, make sure that each one is lit (the red one always looks dimmer than the green/blue ones). If one is out, try tapping on it, it might just come back to life, ...

...fix it. he adjusted the focus block. if you remove the lower front panel, then remove this other access panel under that there will be a block with 6 knobs on it to the upper left of the access port. ...