Toshiba PDR-5300 Digital Camera "risk return solutions" Questions

...return back into the camera This is a typical lens problems unfortunately. If the lens is stuck at an angle like the leaning tower of Pisa, then you can try to "snap" it back towards the middle to ...

...approaches that of the camera), they're worth that try. Some of the later steps do involve some risk to the camera, so carefully weigh your options before deciding to conduct them: And here's a ...

...It would not move and the camera would not function until this was cleared. DO THIS AT YOUR OWN RISK! A camera 'expert' suggested that I twist the lense to it's fully extended position while the ...

...risk. Hold onto the larger ring of the lens, the one closer to the body of the camera and place the round edge of the outer section of the lens against the edge of a table or counter. Now apply ...

...if it has a "write protect" tab then lock it now. Do not try and write anything to the card or you risk causing more problems. You can either plug in you camera to the PC as it should appear as a ...

return options. Good luck! Hello The problem is that the lens has become stuck in the barrel after dropping it. There are some DIY solutions you could try, but the probability is that you will have to

...return it, and it really bothers you, there are a lot of camera shops that could fix it for you. Or, if it is not much of a nuisance, leave it be, it may last for years. Sorry I couldn't be any more ...

...RETURN BACK IN AND SHUT DOUN THE CAMERA Hello The problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the probability is that you will have to get ...

return back. The screen shows "ERROR 3". Hello The problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the probability is that you will have to get

...solutions you could try, but the probability is that you will have to get it fixed by a professional. Use these at own risk as it may further damage the camera. Firstly , try connecting your ac ...