Sony KP-53HS30 53" Rear Projection HDTV-Ready Television "pje" Questions

PJE mode problem I cannot adjust picture in PJE mode. I am able to go to service mode, select GRN LIN, GRN PIN and other options, than when I move joystick up and down, the numbers in the upper right ...

...yesterday, turned TV on, and it's bad. Flash Focus doesn't fix the problem. How do I get to the PJE mode? I used to have it written down, but no longer have the sequence required. Any help much ...

...convergence is much better but still off, even flash focus didn't fix it completely. I can get to PJE menu but lining up the grid has been a challange, I'm assuming every square in the grid has to ...

...Hello, Your unit need convergence and purity alignment. Go to the service menu and Enter to "PJE" section of Service menu and you can adjust. If you are a tech you can do yourself otherwise ...

...mode, enter executes it. you will want a test pattern displayed that has a center point, enter the pje section of the menu and go to tphp, if you don't see a crosshair, press 6. you are going to

...shadow. Everything else seems to be working fine. I have the service manual and tried to adjust the PJE Red settings but could not make it work like before. The Timer/Standby indicator blinks 4 times ...

...the service manual and tried to adjust it. I can adjust V & H size and center, but when I go to PJE mode I can change the data but it does not change the screen. The center of the screen is still ...

...with the tv off push on the remote display 5 vol+ power. now hit the 1 button until you see pje fdis on the upper left. now push the 9 button to enter convergence. you should now have a

...all the connections made but the convergence will not adjust with the blue. How do I get into the PJE mode on the SX-481 TV? You enter the service menu by using the remote. Press DISPLAY, 5, VOL+, ...

...Your TV should come on with GReen letters. After that press 1 and 4, 2 and 5 to change menus. Go to PJE (or something like that) and you should see PJE GREEN CENT, SKEW, SIZE etc. Press 3 to change ...