Sony KP-65WS500 65" Rear Projection Television "screen g2 control" Questions

...G2 = screen...On the screen controls behind the front grill, behind the hardboard. 6 pots, 2 rows of 3 pots. 3 for focus and 3 for screens. 1 for each of the the red, green and blue guns/crts. To ...

...screen volts (G2) so retrace lines disappear and projection screen should be blank. Now do same process with green and blue adjustment while other lenses should be covered. Im not sure I conveyed it ...

...G2 volts (calls Screen volts) of Blue gun. If you are familiar with big TV repair and have electronics knowledge then let me know to guide you further. thank you. Comment posted on Dec 13, 2008 Thank ...

Your Red CRT may be on its way out. Try turning down the G2 screen control on the red CRT just a little. That should help for now. A new red tube wil be a reality in the future. how do u lower the g2

...Screen Volts (G2) of all 3 picture tubes and screen volt control knobs are on focus block located under speaker grills at front of TV. Remove speaker front grille of TV, look for focus block that has ...

...PICTURE IS VERY GREEN, WHAT COULD THIS BE? IS IT EXSPENSIVE TO FIX? It could be your green CRT . Which can be expensive. Try turning down the green G2 screen control.That should help for

...Screen (G2) to Blue CRT. Take off front lower cover (speaker grill) and unscrew board. There you will need to find Focus Block mounted having 6 control knobs. 3 knobs are for Focus control and 3 are ...

the image is ok accept when you have a dark screen yes this could be the start of bad picture tubes . but you can adjust g2 controls and get rid of the line the picture is showing 3 of the same things

...screen ? take the back off there should be a small rectangle with 6 buttons on it 3 for focus and 3 for the G2 (screens) some models have this control in the front behind the speaker grille behind an ...

...restore raster. If not try turning thr blue down slightly. Screen controls have to be adjusted by taking voltage measurements while adjusting the G2 (screens) let me know if you need additional ...