Sony KP-51WS500 51" Rear Projection Television "tv blurred lines fix" Questions

...TV, the picture stills is there but is blurred by lines curving down in the middle of the screen. The TV is about 6-7 years old. It has not been moved around or bumped ...

tv went blur. I tried to manually adjust the convergence, but the blue crossed lines can't only be moved up but not be moved down to align the green & red crossed lines. Can it be fixed easily? If not

seperated colors Hi, thank you for looking at this. After our move, our TV?s colors specially blue and Red are not lining up properly. what should i do? I looked for different settings to get them ...

TV Please Help the top part of the screen is blurred. and when the convergents is done all the colors line up but the top 18 inches or so is wont line up the green has a curve to it. Pleas let me know

...TV, it looked blurred (something similar to the problem somebody else described above), or 'ghosting', with yellow onto the left and blue (the most prominent color) to the right. Yes, I also tried ...

...Magic focus after the set gets warmed up? 50 in projection TV has horizontal blurring lines at the bottom half of the screen, picture visible , but blurred. Can you identify the problem and the

blurred & doubled. I did recently move to a new place and noticed the problem as soon as I plugged in the TV in the new place. The TV was transported in a truck, so it obviously moved something out of

...tv. It works fine, but a week to hours later the flickering Static like lines and blurred Words and such comes back. What can i do by myself to diagnose and fix this low budget to free? Check all ...

...blurred / doubled. My Hitachi 53UWX10B TV looks like have the screen is doubled. Just started doing it. I have taken a picture of it and as you can tell the left side of the screen you can see double ...

...tv is blurred... almost concaved looking and the convergences is not lining up with the crosses. What can we do to fix this? Must know how to solders?Ur convergence ICS and all the resistors must ...