...the blue glycol.... basically growing algea in the blue tube... it is possible to remove the tube.. and remove glycol and clean the tube then replace and adjust..i have done a few here at the ...
Question about Mitsubishi Televison & Video
...remove the back cover--turn the set on and call up the advanced convergence grid---then cover the lens for each tube one at a time--with red and blue lens covered are the lines in sharp focus or look ...
...blue should be clear but never as perfect as green or red--this is normal. I do this here for free so if this has been helpful give me a vote here. if you need direct help: [email protected] ...
...the issue with arched lines, either blue, greed, or red. There is a great how-to guide here with step-by-step pictures here: ...
...BLUE portions of images may have halos or be missing entirely.Turn the color level control all of the way down and remove the screen and/or the cabinet that contains the mirror. (different for ...
blue and green line. Adjust green focus and watch green line for best focus. Do same for other 2. Screen adjustments are very exact and delicate. The easiest way to deal with them is to turn color off
...remove them? Check the mirror and lenses inside the tv for any debris...if thats not it the crt fluid is likely gunked up....see the doc below... Below are two of the most common problems encountered ...
...remove it and yo will see a small black epoxy box with 6 knobs sticking out from it. with the color turned down all the way, look closely for r,g,b on the box beside each knob this denotes which knob ...
...remove all of the old heat sink compound, as it can act as an insulator for the new IC's and cause them to overheat. I usually clean the heat sinks with alcohol and a small rag. Where are the IC’s ...
533 questions posted
Usually answered in minutes!
1,430 Questions
874 Questions
716 Questions
647 Questions
601 Questions