Sony KP-51HW40 51" Rear Projection Television "570 sd" Questions

repair. Give me a email and I will send them free. If this was helpful rate this solution as very helpful as I do this here for free. SD TECH Chips will look like this but have the STK-392-570 ON THEM

...of these sets. They use two of the STK-392-570 CHIPS. BEST PLACE TO BUY THE PAIR OF CHIPS IS EBAY SEE INCOMING INFORMATION. IF YOU LIKE IT, RATE THIS SOLUTION AS I DO THIS HERE FOR FREE. SD ...

...570 ICs and 3 pico fuses. I can get the horizontal lines to converge but I cannot get the verticals lines to move at all. 101bill I know these sets very well and have posted instructions here for the ...

...570. You can buy them online, they're all over the NET.. You need to know what you are doing before touching this part. This part is located in a dangerous area of the TV. Warning High Voltage can ...

...me to answer in the new Marketplace here on Fixya.see attached photo of chip and also part of middle board with the green pico fuses.chips look like this but will have 570 number on them.SD ...

Sd Tech- thanks for all the info you are really helpful! I took the back off and I was looking at the fuse chart but didn't see any marked STK-392-570 CONVERGENCE IC'S. You said you may be able to get

...570 CONVERGENCE chips this model uses need to both be replaced---under 30 dollars total cost depending on where you buy them. I have instructions for this repair in the model. Let me know and I will ...

...570 CHIPS. IF WHATEVER SET YOU HAVE USES A STK-392-110 YOU CAN USE THE STK-392-150 TO REPLACE IT--it is a higher current device than the 110 chip---there are some others even stouter but some create ...

...570... can I replace them with a standard soldering iron and non-lead solder? Are they mounted directly on the heat sinks? I have step by step start to finish instructions for this repair if you want ...

...570 chips need to be replaced. If you reply to this post I can post step by step instructions and photos of the fuses and the chips. ALL PARTS NEEDED ARE ON THE MIDDLE CIRCUIT BOARD AND TOTAL PARTS ...