Sony KP-46WT510 46" Rear Projection HDTV "white line left side hdtv" Questions

...everyday since bought for 7 years and turned it on just to see a white screen with some green lines on the left side but sound is still there and clear. convergence problem...very common. Great

...white on the left side and the right side is light blue horizontal lines. We can hear the sound of the channels. Does this look like a major repair? Thsi set is a KF50WE610 and a few years old. I ...

...white horizontal line to have a green tail. If I move the blue and red to line up with the right side of the green then the left side will have a centemeter of green and the vertical green will be ...

...line shadowing(Just like 3d imagining) On atempting manual adjust using remote center top middle and bottom where fine adjusting to a white cross, both left and right hand sides would not adjust. ...

...line up One or more colors can't be adjusted when using the convergence menu. Screen is bowed or warped. The other common problem is cloudy lens fluid. After many years the coolant in the blue and ...

...white + the vertical red line becomes arked and sticks out to the right at the top and to the left at the bottom. need to replace the convergence Ics STK392-110 there are two of them. Also check the ...

...White, about three inches up almost centered a little to the left when looking at it. There is a dark line that seems to sway back in fourth it is about 2 inches long almost looks like a spider web ...

white line, you want to move the right, left, up or down button so that the blue or red line gets back on track with it's corresponding white line grid. It sounds complicated but you will get it after

...line on the right side. These lines are not straight and they do shift around in the face of the people. Any ideas what is causing this? Any solutions? Thanks Hi,Yes your problem sounds like the DMD ...

...white plastic plugs on the DMD housing. Utilizing another person to watch the screen in the front adjust your DMD board. NOTE*** all adjustments are opposite. If the line is up top then you want to ...