Sony KP-57WV600 57" Rear Projection HDTV-Ready Television "crt tv pin base" Questions

TV. There are a number of conditions that may exist. 1. CRT is defective with internal Heater cathode leakage or other fault. Typical shop estimate CRT +$300, Labor $2-400 Handling extra. JVC CRTs are

tv went blank except for three lines. red, blue and green straight across screen. we still have sound. mitsubishi VS 6043. Sound like you lost Vertical Deflection. Youshould not have a line across the

CRT Circuit boards at the socket. the fix is- unplug TV, take off speaker grill (it just pulls off- no screws) and there will be a panel that can be removed. Take that off. now you see the ends of the

TV repair is quite expensive. Any tips on other things we can try. Thanks, Nita If the convergence can't be adjusted with the remote are if a tech comes out and he can't adjust it from the back of the

TV. But what is the model number? :) its not an upgrade. its a replacement for know failures. I have had to go into stores that were selling the device and fix them before they sold them but of course

...CRT going crazy and then the TV shutting off. 1. unplug everything. 2. unscrew the front panel 3. wiggle the board attached to the base of the middle (green) CRT off. (there's some silicone on there, ...

CRT projection TV?s) can cause a dead set symptom in many models. Vertical output IC failure can also cause the same symptom (CRT standard and Projection). The only way to determine the real cause is

...TV picture keeps shrinking to about half size, and after atime comes back to fullsize. I do not know the make. Other TVs in the house are OK. Could this be expensive to fix? Thanks, R.L. I can only ...

TV picture will give a double image. Picture with a second image of red. Like it is pulling the red away from its normal position. Usually happens when cold and tends to correct after being on for ...

rca d52w23 has distorted picture. it is shaped rca d52w23 has distorted picture. it is shaped like a concave along with the colors. what is the matter? Go to menu then setup look for convergence if ...