Sony Grand WEGA KDP-65WS550 65" Rear Projection HDTV "adjust yellow green color" Questions

adjust the color The color on our tv is off- too yellow/green. We can not get good color through the color adjustment on the remote. Do we need to call a repairman or is there some other adjustment we

...grass looks yellow, blues look more gray. i tried to adjust the tint but can not find the right level 2 things the cable could be faulty (unlikley)but worth a try or your lamp is starting to ...

...Picture No color adjustment removes the RED... No Green or Yellow. Yellow Brick Road is Red no matter what adjustments are made :o( hard to provide any help here with no brand or model number

...adjust it anymore but does that part also control the yellow and green etc? there are two ics trhat control the three colors alignments. Its always recomended to replace both Convergence ICs at the ...

...blue up with the yellow. Save changes and it should help the adjustment and color some.. After that go back to the MENU and adjust the basic colors (Contrast, Brightness, etc.) convergence ...

yellow and blue no matter how high or low I go). Looked for the "jumper cable" others have mentioned, but got all the way to the circuit board and confirmed my model does not have that jumper cable on

...adjust the colors it remains the same with too much green. You can't see the true colors clearly especially white. The picture in general is darkened a little bit. It is very common for the color ...

...yellow. how do i get these colors adjusted? I have shadows in these colors. thanks. when i check the convergence, nothing happens when i adjust the blue. Problem as described is a repair = replace ...

yellow not lined up try to set the convergance if you cant you can adjust the color tubes from inside the tv but have to be very careful to do this. There is actually only 3 colors in the tv red, blue

...adjust the video settings the colors only come out as either almost black and white or a sea of yellow or green. I can get no color detail. What do I need to have repaired? Is it my projection tubes? ...