Sony KP-51WS510 51" Rear Projection HDTV-Ready Television "pico fuse keeps blowing power" Questions

...pico fuse on middle board and set will not come on.Plug set in, turn on, when green power light goes out on the front of the set press and hold both the menu and input (device) buttons for at least ...

...Pico fuse position E994 continues to blow. Hence, no power, no video. Check these two - common faults - from hitachi database Symptom: BLOWS E994 Cause: DEFECTIVE D604 Symptom: E994 KEEPS BLOWING ...

...pico fuse (only one fues of too on g board of power supply) and am trying to find if there is a resistor that needs to be replaced.? would you know how to check the resistor to replace them and if ...

...after all that info, wow anyway replace them and yes you need Rz123 and Rz124 to be 3.9Ohm @ 2w don't sub. Now also order a, 3.5a pico fuse for location Fd102s. regards, hope this helps you.

...fuse in middle of power supply board that will blow, also solder everything that looks like poor connection pioneer always has a lot of cold solder jionts.CK all pico fuses they are green,yellow look ...

...pico fuse? I know it is old but just picked this up used for cheap. Worked fine after I got it home. Moved it around a bit, then got the convergence problem. I have fixed this before in another TV. ...

...pico fuses are little yellow fuses that look like resistors. When they blow, they will show no physical sign of failure. The amperage rating will be printed on the fuse. For example a 5 amp fuse will ...

...pico fuse E994 and it's OK, also C701 seems to be OK since I don't see any burn marks. Any help is appreciated. Thanks, Tim If E994 has continuity , then C701 is ok. defective C701 gives problem with ...

...pico fuses too let me know wich fuse is blown for more help Also look for leakly or bad caps,will cause it also. Thank God I finally got a real answer Because the customer service at apex suck! Thak ...