...standby light blinks 5 times? I+the manual says "call a repair center", but this problem occurred AFTER they came & repaired/replaced teh red tube. Thanx. red blinking light... won't turn on.. 5 ...
...standby light come on for a minute or so then goes to 5 blinking red light sequence. have unplugged power cord and disconnected cable connection---no avail. you will need to replace the lamp ballast. ...
...with any action that occurs when you attempt to turn on the set. For example, does the standby light blink? If so, how many times? With that info we should be able to give you some options. Thanks, ...
...standby light should be blinking a repeated count with a short pause between the count. Please update this with that count. That will indicate the circuit in which a problem is found that is causing ...
...Standby light blinks 10 times followed by a 3-4 second pause and then repeats 10 blinks, and so on. I have unplugged set, waited 5 minutes and plugged back in, but re-set did not work. When I press ...
...Standby light flashing 8 times and TV has no picture or sound. Checking CN8016/pin 3 on the D Board was going above 7.4v, thus causing IC8008/pin 12 to put the set into shutdown. Found HV Block was ...
...light does not appear to be on) or none of these. :) These are just guesses. Be careful if you open it up, due to potential for shock. Wear gloves, and power it down first (then unplug). Reseat any ...
773 questions posted
Usually answered in minutes!
1,430 Questions
874 Questions
716 Questions
601 Questions
479 Questions
