Sony KP-46WT520 46" Rear Projection HDTV-Ready Television "tv tube hold electrical charge" Questions

hold the power button the TV comes on with sound but once again with no picture and then clicks back off...I'm using Directv and have been for several years. Any ideas Your symptom is that you have no

...tube i have, or replace it and then recalibrate my tv. Is there a cheaper solution? can i just buy the part and plug it in? If you have had the set diagnosed by a technician, $500.00 for a picture ...

...TV's then you should call an expert. If you are comfortable, then read on. It has been my experience with older rear projectors that the solder joints on the main board become cracked over time. If ...

...TV's then you should call an expert. If you are comfortable, then read on. It has been my experience with older rear projectors that the solder joints on the main board become cracked over time. If ...

...TV turns on then turns off. It has been my experience with older rear projectors that the solder joints on the main board become cracked over time. If you have a set that shuts down after warming up, ...

...TV over night. If turning it off and on a few times won't solve it in the long run(that's the way you make the degauss mechanism work), you should look again into repair options in your area. Good ...

...TV's then you should call an expert. If you are comfortable, then read on. It has been my experience with older rear projectors that the solder joints on the main board become cracked over time. If ...

...hold a charge so be careful. Cold solder joints or cracked ones can be seen with really good lighting. Look for a half moon shape on the solder joint, epically on the large transistors near the heat ...

...hold a charge and zap the **** out of you if you weren't paying attention....did you run in to anything like that? Can you think of anything else I should be on the lookout for? I'm good with a ...

...tv on, I still get no sound or picture and the blinking timer light up front. But I don't even know what to look for on the power supply board. Are these fuses like on your car that can be unplugged, ...