Question about Hitachi Televison & Video
...lamp plugs into the ballast, The attached videos shows the ballast and location near the end of the video. Check the attached links. Good luck "I hope this helped you out, if so let me know by ...
...lamp being installed & check to see if the color wheel is spinning. Would have save money on the lamp & ballast. Ur ballast it dead,need it replaced too.Beside the bulb.Sometime,must replaced ...
...lamp and have the ballast blow that right away. Is there any way to check if the ballast is still good? Would I be encouraged to replace both the lamp and ballast in case this is somewhat of a common ...
lamp, also check the fans because if theyre not working the DMD board receive that info and turns the tv off also it could be also the ballast that could not be regulating the voltage to keep the lamp
DLP chips fault is very rare; unless you have handled them very carefully. Check the lamp and BALLAST baord that supplies voltage to lamp.Picture of the ballast baord to your TV is attached
Lamp then check Lamp Fan if it stops running Lamp will not turn on But if Fan is running then its your Ballast Board thats what turns Lamp on! Part# for Ballast Board is 1-468-798-15 Try UED 1-800-648
...lamp and ignite it. If you aren't even getting to that stage, you can trace the problem to another component or power supply. Hi. Most Dlp sets have a fan for cooling the bulb this should start at ...
CHECK BALLAST LAMP FOR 62HM95 Ballast Board Powers Lamp, the 2 plugs on Lamp connect into Ballast board just follow the wires from where lamp plugs into. Does Ballast have a ark coming from a componet
...lamp, ballast and power supply are good. Would that be right? I did notice about a month before it quit working a winding noise when the tv was powered off after running for several hours, more like ...
1,050 questions posted
Usually answered in minutes!
1,430 Questions
716 Questions
647 Questions
601 Questions
479 Questions
