Sony Grand WEGA KDF-60XS955 60" Rear Projection HDTV "sxrd 3 blinks" Questions

...3 times,, WHAT IT MEANS THAT?? THANKS SXRD 3 blinks means that the lamp cover is not attached securely. You might try making sure the door is closed properly. Remove,clean and fastern the lamp ...

SXRD for about 18 months. In the last few weeks, the TV has started to lose its picture and screen and then the green power light blinks for 2 minutes and the TV comes back on. This repeats every 5-10

...sxrd tv and now get 3 red blinking ligh 3 red blinking lights indicating that the lamp is not secured it looks and feels secure any other solutions I am having the same issue, just replaced bulb not ...

...sxrd i have no pic or sound the standby light starts off by flashing green and then goes to a red flashing light 3 times. i have replaced the bulb and it still is doin the same. is the bulb not ...

...SXRD model kds60a2000 had replaced power supply solved 5 blink problem now when room temp below 72degrees wont run get 9 blinks and the new bulb only lasted 3 months.is this the lamp driver? and does ...

...sxrd blinks green 1x then red 3x then it repeats red 3x..I have already replace the lamp can you help? Blink's 3 times, Diagnosis: +B overvoltage (OVP). Possible causes: IC501 is faulty (G board), ...

...light blinks for a while and then goes out and the red light starts blinking. The TV is a Sony SXRD KDS-55A2020 and is 3 years old. I have the same problem. Can a bad lamp cause the sound to go

sxrd 3 blinking red lights thats indicating the lamp door cover isnt attached properly or the lamp inst inserted properly. Check both items it could also be the lamp door switch if the door is shut ok

...sxrd project kds-60a2020 and i replaced a burnt out bulb, and when i turned it on i hear the fan turn on and it turns off in 5 second , and the tv wont turn on. make sure the lamp and lamp door are ...

sxrd 60 inch fell off tv stand and now does not turn on. The green lights goes on but the tv doesnt turn on and i get 3 blinks from the red light. what does the 3 blinks indicate? "Will Not Work" "Bad