Sony Grand WEGA KDF-55XS955 55" Rear Projection HDTV "tv takes 30 clicks" Questions

samsung tv wont turn on or takes 30 minutes lots of clicking going on bad capacitor inside power supply or main board

30 days!.... So basically i plug the tv in and it clicks ... i hit the power button and it turns the red light off on the front(doesnt click) and then i hit it again and it clicks and the red light is

...TV disconnected from power for about 30 minutes. To drain power completely. You can follow the basic troubleshooting on this article: Why my TV does not start up and remains in... If that does not ...

...takes about 30 seconds. When the TV is warm the fan doesn't make the high pitch sound and it does not go back to standby before it starts. This sounds like a lazy lamp--that is getting hard to start. ...

...30 minutes or more. What's going on???? U hear alot of clicking,when power on to the tv?Yes,the ballast board,that the board that help to ignite the projection lamp is dead.The Ballast board is ...

...TV turns off after 20 - 30 mins and won't come back on for about 20 - 30 mins. When I try to turn the TV on during this period, it makes a click sound. After it's presumably cooled down, it will work ...

...TV and it takes for a while to see it up with the image. Initially it was good for a 30 - 40 minutes on Video 2. Recently I was using my cable TV and I went through the channels which were not ...

...TV on that board was the resister next to two fuses. My 4 amp 125 volt fuse did not read on my meter. After replacing, it worked fine. I need to know how to slise the panel out in the bottom to get ...

...TV, get it home and SURPRISE! It doesn't work!We we try to turn it on and the LAMP light on the front just flashesfor maybe 30 seconds, then the STANDBY/TIMER light flashes for a bit.You can hear it ...

...30,OOO volts. use a voltage probe, or make one with a short wire and 2 allagator clips and a flathead screw driver insulated handle, carefuly clip one end to the ground or shield ******** tube,then ...