Sony Grand WEGA KDF-60WF655 60" Rear Projection HDTV "tv bulb timer" Questions

...some assistance, and specifically wondering ifthe timer circuit is located on the bulb itself or in the tv. any input will be greatly appreciated. Bulb must be replaced before viewing will

The timer should have been reset when you first turned the TV on after replacing the bulb. Make sure your bulb is an Osram brand bulb. If not, then you do not want to use it as it may not be very good

...bulb from the TV by first unplugging it from the wiring harness. Carefully rock the harness back and forth until it comes free from the bulb. Push in the bulb slightly and turn it a quarter-turn to ...

...bulb inside. Any compatible(knockoff)lamps will not perform as they should. Mitsubishi DLP TV Bulbs These folks sell original Osram bulbs in their lamps and they have a 6 month warranty. I use them ...

...screen green flashing timer for two minutes then solid red light for bulb you may be on the incorrect input channel. look for an input or tv video button and choose each input until u get a ...

TV. I replaced the bulb and with in 2 weeks I had the on screen notice appear that the bulb was failing. I returned that bulb for another one but the on screen notice is still there. Can this be reset

...bulb tv said change bulb reset something or other by using the remote/ couldnt do it , dont have a remote... changed channel it went off. do i need to reset or can i, w/o/a remote,, or what ? Many ...

...bulb,can not reset lamp timer Vivitek Model RP51HD41 turn the tv ON: On the side of the TV press the menu and volume up buttons at the same time for three seconds. The 'reset lamp timer?' will appear ...

...tv on, there is a box that comes on and says replace lamp bulb and lamp timer, I changed the bulb but I do not know how to change the timer? I can help you reset the lamp timer for your Panasonic ...

...tv is saying its time to change the bulb . mines doing the same . i know it sounds stupid and trust me it is but thats what it sounds like . what i have been planning to do to mine is pull the bulb ...