Question about Delfield Freezers
...low side and high side charging 404a refigerant cooling temperature frezzer 404a what is the nomal cooling temperature suctio evap temps usuall run 10-15 degrees below the box temp.This a generally ...
...low side and on the high side for truee freezer using 404 refrigerant I'll try to give you the "Readers Digest" version. First, make sure there is no ice build up on the evap. Light frost is O.K. as ...
...low die at 12 and high side at 120. whats wrong? unit is not cold at all. please advise. Charge until the sight glass is full. I suspect your pressures will be be better. 12 psig is low even if the ...
Question about Continental Freezers
...low side should equal a temperature of about 17-18 degrees if the box is not hot and a high side of ambient plus 30. Again, this is a general rule of thumb that usually gets you close enough to get a ...
...Low site pressure will be dictated by the super heat. The high side, in many cases, is usually ambient plus 30, then convert to psi. Let me know if you need more info. And please double check the ...
...low charge on a 404a system and you charge thru the suction as a vapor. I had a memory lapse and have charged 410 systems as a liquid thru the suction side with success . after realizing what I did I ...
...proper operational pressure on the high side is 450 psig and on low is 200 psig for R-404A not overload the compressor with liquid refrigerant and to help the compressor run below it's designed
...high head pressure. If you don't have sufficient water flowing over the evaporator plate, where the ice freezes, the head pressure will go up. You need to check the low side head pressure as well. ...
Question about Freezers
...low side is around 20-25 PSI and High side is about 235-250 when unit is close to operating temp. Expansion device effects this to some degree such as a cap tube can restrict and affect pressures as ...
30 questions posted
Usually answered in minutes!
39 Questions
34 Questions
23 Questions