Sony CDP-C445 5-Disc CD Changer "slot loading player" Questions

...slot goes in and then opens...it does not retain the CD inside to play... Hello This fault is due to loose tray loading belt or weak loading motor. You just change the loading belt with same type. ...

slot and then it says no disc and opens... Hello Your JVC CD player has some mechanical trouble. It does not load CDs fully into the tray. Either tray loading motor or its belt iis faulty. Replace the

the cd will not load it not reads it or it not "eat" it ? Sounds like a cd slot mech fault, if you havent had it repaired you can send it to us. Regards. http://www.audiovisualservices.info/

the update cd for the wave music system is reading not playable. this is the cd needed to update system to accept multi cd player put it in the upper unit (main) don't load it from new 3 slot

...in it just wont load it, no humming, no attempts, its as if it were turned off. sounds like a cd slot mech problem,if you havent had it repaired you can send it to us. thanks. ...

...up and load the disc but no spin. Sets it back down and continues to cycle through all five disc slots. Any ideas? Most common reason for this is laser failure. It is not sensing the disk so the ...

won't play any disc on any of the 5 slots boom box also has casette player that records Rca 5 disc changer. Simultaneous play and load system rs 2650 Laser is either dirty, so a lense cleaning disc ...

...you will need the laser mechanism replaced electech CD lens cleaners are not to be used with these slot load cd players (as per the manual). Please visit www.denoindjforums for further

...does not recognize disks that have been loaded. When you hit Play, it pauses, checks all of the slots in the tray, and says there are no disks. Hello, how long have you been using this player?

...loading" but no other controls work. top cover off. dvd is not in resting tray slot but held up by loader or play module at rear of unit. want to get dvd out without damaging disc. So you want to ...