Sony CDP-CX400 400-Disc CD Changer "resetting load mechanism player" Questions

...LOAD BUT NOT SKIP TO NEXT DISC Possible failure of the loading mechanism of the set. You will need to remove and reset the loading section with a lot of care only if mechanically minded. Sometimes a ...

...fix is there a reset button? sounds like your loading mechanism is jammed up. I would take the cover off, and look in the back where the cd's load to play and see if you can see anything out of

Center hub won`t stay up to receive 45`s on wurlitzer 3600. The centre hub is pushed back upwards after a record is replaced. If the mechanism is jammed or a bit missing it won't reset. What holds it ...

...resetting. Please open the set and check if there is any foreign particles lodged into the dirve mechanism. Clean and proceed. Check carefully for any sensors that are out of sync.If you are not sure ...

...resetting the memory on these units - is that true? Would love to get it up and running again. It is possible that the laser has gone, the part you require is: Sanyo SF-P101N CD Mechanism - 16 pins ...

...mechanism trying to load a disc each time you pause the rotation of the carousel to replace the CDs properly. NOW MY QUESTION: any way to load the discs easily to a PC for MP3 conversion? Anyone ...

My sony cdp cx455 is turning on but not off first no disk press power disk1. Tried factory resets but i get sony cdp cx455 then it won't go into standby mode. The only way to turn off is unplug. check

player. I apparently pushed too many buttons too fast and confused it. It flashed "error" and now won't do anything other than power up. I tried unplugging it and letting it "rest" overnight, but that

...player and recorder the problem is it has power but it will not function or open it will just flash read when i press open it dose nothing what shall i do If for some reason you would opt for user ...

...Player Since the early beginning after purchase, my NAD C541 jumped both with CD and CD-R. It's a HDCD that, for other respects, sounds very well. I'm very upset with NAD for the zero-value technical ...