Sony TC-WE305 Single Cassette Deck "channel working" Questions

teac a-3340 not recording on channels 1and 3 working well except will not record on channels 1 and 3 You need to set the various RECORD switches correctly -- both the ones on the lower right and the ...

Teac A-3440 Channel 3 will not record Channel 3 plays but will not record Firs clean heads, Then cgeck for dBx jumper cable in the rear- these all have to be in for the unit to work. Then if that does

...around for them. Otherwise it sounds like a amp problem. It is also something that common to both channels. Maybe an IC that both channels goes into, or perhaps the IC is not getting

td 307 hum after playing for 10-15 minutes, hum starts in background Generally hum is associated with Capacitors, though in this case it might a semiconductor (transistor or IC) that is getting hot ...

...buzz by touching the terminals where the head leads join. As you are getting no sound from either channel it might be the power to the board. But if you see a single IC it might have gone. For the ...

...channel lead to where it joins with the PCB. Use a pointed tool and prod connections if you get a buzz then that stage in the amp is working. I suspect you will find it leads to a IC that might cause ...

...channel, if working right. Follow the circuit of the audio and keep probing. If you get Buzzing sounds near the output, and where the wires from the head enters, then there's something up with the ...

...does not record in stereo anymore. My tape deck does not record in stereo anymore, just on the left channel. After I mix audio recordings I like to put samples on cassette to see how the music will ...

...channel 4 track deck) play tracks 2,4 in the opposite direction. That is why you turn the tape over on some decks. Other possibilities could be tape path skew, that reverse relay is NOT changing the ...

My 4th channel on my akai gx 400d ss is not working. Lights up. Clean the heads real well then after that it is a matter for the Technician to work on.