Sony STR-DE915 "replace fuse amp receiver" Questions

sony receiver keeps blowing 5 amp fuses sony receiver keeps blowing 5 amp 125 volt fuses You have shorted output transistors in the amp that need to be replaced.

...amp ones blew). I replaced the fuses and powered it up with no peripherals attached. The same fuses blew again. Does anyone know if this is a common problem with this receiver? If so, please point me ...

...fuse schematics Pulled fuses from receiver to replace because amp was turning its self off. Didn't know they were different amperages and now don't know which go where. F101 is 8 amp / 250 volt slow ...

...amp wont turn on first check the fuse located on the back and if your receiver does not have a fuse on the back then open the receiver and check the fuse inside. 80% of the problems are fixed by a ...

blew a fuse on my STR-V444ES receiver need to know what amp fuse to get to replace it The stock fuse is a 10A 125V 20mm glass fuse.

...1/8th, 250 volts These fuses come in different AMPS. I need to know the AMP number please. That means it is 1/8th Amp fuse. So the info you have is the fuse you need. The other fuse (mains) is a 5 ...

replace line fuse, don't know amp rating for fuse usually fuses have voltage and current ratings mark on them you just have to look for it or sometimes near the fuse housing.or you can use the formula

...amp transistors, replaced R35 and R37 burnt resistors, no change, still blows the 6 amp fuse. Your problem lies in the power supply of receiver. Check the capacitors and diodes for proper

...amp fuse I used was 20A, the factory 3 Amp fuses get immediately fried upon load, and I have few left). It seems like the receiver is the issue because all of my test speakers output a low *hummmm* ...

...amp. After 14 years, it decides not to power up! Are there internal fuses? Can i replace the power supply myself? There are internal fuses that you can check. This model was notoriously bad for amp ...