Question about Onkyo Audio Players & Recorders
...reset from the amp protect mode Onkyo receiver TX-SR600? My receiver is in the Amp protect mode. How do I reset my amp / receiver from protect mode ? if your receiver is in protect mode then that is ...
Question about Denon Audio Players & Recorders
...mode. How do you reset or make work? The reciever will go into protection mode when there is a short in the speaker wires or the amplifier was overloaded. What I would do first is verify that none of ...
Question about Marantz Audio Players & Recorders
...reset marantz sr4001 from protect mode? Protect mode comes into play when there is a problem with the speakers or amplifier First check all the speakers for opens or shorts If they are fine you don't ...
Question about Audio Players & Recorders
...reset sonymhc-ec709ip, it's in protect mode Protect mode isn't something that you can reset. It most likely has a bad amplifier Ic that will need to be replaced to return the unit to normal ...
...reset the protection mode The protection function has been activated because it has sensed an output load problem, turn receiver off and remove the speaker wires, this will reset the protection ...
Onkyo tx-sr800 PROTECT mode how can i reset my receiver out of PROTECT mode Hold video1 and press speakers A button, it will say "clear" If the message protect appears again, then its service time.
...reset or fuse that I can replace myself? Thanks Jim The protect mode with nothing connected indicates that the output transistors for one or more channels are shorted. These will need to be checked ...
reset circuits by draining power completely. If that was the problem, you will not get Protect when plugging back power cable. If you do all the above and still get Protect, then there is a real fault
Question about Optimus Audio Players & Recorders
...reset" protection mode. This is an indication of a defect. Disconnect the speaker wires completely and if the protection mode remains, then the problem is internal to the unit and is likely to be ...
protect mode", there is no reset. See the link below for an explanation of protect mode. Specifically for your unit, should you find that the outputs are defective, you can expect a parts cost in the
25 questions posted
Usually answered in minutes!
415 Questions
267 Questions
266 Questions
180 Questions
148 Questions