Sony STR-DB930 Receiver "connect tv amp bluray" Questions

...tv. its not the cable we tried others that work, it transmits hdmi between the bluray & receiver just fine. its still under warranty - any ideas? On most modern receivers you must select which ...

amp is in. If i do this during commercials--I have to do it again, because I lose sound again when the program is back on. I tried 2 different cables to troubleshoot, and also hooked directly to my TV

...amp; 1.2a just don't cooperate with BluRay and even HD Cable or HD Sat receivers. If you just purchased this receiver recently, return it and get an 09' model or equivalent with 1.3a or 1.3b HDMI ...

...connect the PS3 directly to my TV (LG70) in order to see an image. I tried resetting the display setup (by holding the power button for a couple more seconds once it has turned on) and re running the ...

TV? I would like to minimize the appearance of cables in my setup and just have the cable box plugged into the receiver. Can't be done. Your version of HDMI firmware and hardware in your receiver have

...amp says "unlock".the pic is going to my tv via a hdmi cable this is ok,but i would like to be able to watch blurays and play games with the sound going through the 5:1 dts amp. Hope you can help. ...

...tv is sending a 2-channel stereo signal to your receiver. Your amp shows only L and R. But since it has a processing system, depending on the processing program you have chosen it will probably ...

...I have just completed this installation myself. You are correct, HDMI to Amp Input from Bluray and then HDMI from Amp output to TV. Coloured cables are not required to operate the bluray now. Good ...