Question about Sony Audio Players & Recorders
...amplifier goes into protection mode. One minute it's working and the next minute it's not, usually with the green power LED on the amp turning to red or orange. Here's a brief ...
...fix this problem. hi, First of all remove all the speaker connections from the amplifier. After that power the amplifier and check the overload (protect) show or not . if not, then any of the speaker ...
...amplifier section is shorted or the speaker wires are shorting, including speakers. The speaker wires can be checked and eliminated as a problem, where frayed wires are touching the other terminal or ...
Question about Panasonic Audio Players & Recorders
...amplifier ability to drive your current speakers. If after all of the above is performed and the condition still exists, try speakers with compatible ohm rating but higher sensitivity. i have he-75 ...
Question about Harman Kardon Audio Players & Recorders
...fix my audio/video receiver that has no sound coming out of it? Unit powers up and display lights up showing functions and display responds to switching sources, tuner diplay, inputs and surround ...
...Under the HDMI setting menu on the 605, doesn't it need to be set to "Audio In HDMI"? This should fix it. Make sure that everything is set to HDMI and let me know if this still doesn't work Thank ...
Question about Pioneer Audio Players & Recorders
...fix? Hi all, I have this AVR, which has a constant DC voltage of ~12V coming out from all its speaker outputs. I'm fairly technical but can't seem to figure out the problem. The AMP ...
Question about Samsung Audio Players & Recorders
fix. Hopefully, you shut it off right away without cranking the volume up. Start at the rear of the unit. Make sure no individual strand of the speaker wire has touched the binding post of an adjacent
Question about Yamaha Audio Players & Recorders
...speaker output relay, after about 10 to 20 seconds, there is an electronic fault in one or both amplifier circuits, which will require repair. If you like the sound of this unit enough to pay maybe ...
fix this? hi, First of all remove all the speaker connections from the amplifier. After that power the amplifier and check the protect show or not . if not, then any of the speaker is damaged. If then
120 questions posted
Usually answered in minutes!
415 Questions
267 Questions
266 Questions
180 Questions
148 Questions