Wharfedale Moviestar 70+ System "cable sub yamaha" Questions

...cable ronning from the top corner plug (INPUT) going from my yamaha rxv450 amp SUB OUTPUT. The sub is working but not very strong like I think it should be???? Anyone know how / where to get a user ...

...sub without this system control cable input. Can this active servo system be bypassed so it works with any amps single subwoofers output conector?? i am wanting to know the answer to the exact same ...

...cable from the amplifier while the Sub is switched on (turned down about half way) you should hear a thump sound. If you do that proves that your sub is working and you need to look at your Yamaha. ...

...yamaha system with two speakers and sub woofer Most likely the sub has the crossover in it, most likely the 2 input cables from whatever device you want to play through the system will plug into the ...

How do I connect the sub woofer? My Yamaha RX-V477 on has 1 sub woofer pre out. Do I need a Y cable with RCA plugs? Yamaha RX V467 Manuals

...amp, I am using 2 monster cables. The ms 10 is an active sub, so all you should do is connect the Subwoofer output on the rear of your amp to the LFE input on the sub with a simple audio

...cable i had no sub woofer sound but all the other speakers worked at least. check all speakers wires andcheck test mode. every thing ok, may be input wiring problem ,check every thing after that ...

...cable hooks to the dvd/reciever and the subwoofer To use this sub you will need to have a reciever that supports a "system connector" cable such as the Yamaha DVD Player\reciever model# DVR-C310. is ...

...sub, is it there with and/or without the input cable attached? Disconnect the input(s) and see if it hums in the absence of an audio source. A bad audio cable shield or unwisely-routed audio cables ...