...3.Hit the button for the component that you are programming (TV,DVD VCR, etc.). The LED light should flicker and stay on. 4.Enter the 3-digit or 4-digit code that corresponds to the TV or device that ...
Question about Panasonic Televison & Video
...button has coninuity on board'. I assumes that you get power LED at the front of your device lights up when you switch ON the main power switch, and the unit refuses to power ON and work ...
...3-4 times. then the tamper button should be turned off. How I solved the tamper proof stuck on . I used the Philips universal remote (sru3004wm/17) pushed tv button and then pushed the set up buttom ...
...3. Press the TV button onthe univercial remote one time. 4.Press the power button on the univercial remote severail time until the tv turn off When tv turn off press the OK or ENTER button on the ...
...button, but I will get 1 to 3 seconds of picture and sound. Then the screen turns black... no sound or picture and the red LED light remains on. I notice that the TV is actually ON when the LED light ...
...3 cm. Then push any button ,a power button on the remote will surely do, if you see a flashing light from the remote's IR LED then it is working. You can surely try this using a fixed working IR ...
...3 in rear, middle very close to head cylinder). Release 2 locking tabs on bottom of TV while pulling chassis back.Turn chassis on it's side and remove last 2 screws from bottom of circuit board ...
9 questions posted
Usually answered in minutes!
222 Questions
140 Questions
115 Questions
101 Questions
92 Questions
