mind. 2) these numbers represent sub-frequencies that are encoded into the scanner's frequency ID decoder. These numbers can also sometimes identify the frequency's pre-programmed
bank number. These problems are all basic functions of your scanner, I hope this answered your questions.
more...
answer is wrong on #2. The numbers 25, 50 and 75 which appear to the right of the frequency are the stepping. Channel
bank numbers appear to the left and are 00-99.
more...
on scan only scans one band, how can I get it to scan thru all bands? 2. Can new freqs be added to pre-labeled banks, ie fire, pol, etc? 3. Is there a more user friendly/complete operation manual available than what comes with scanner?
more...
have to be in a particular order. Also, unless indicated otherwise in the scanner's manual, you should not mix other frequencies in the same
bank as the EDACS frequencies. We do not have information on the correct order for specific EDACS frequencies
more...
This could be caused by several problems, try checking if you locked out your scanner's pre-programmed priority banks, also make sure that the squelch control is operating correctly. You could reprogram the scanner and see if it helps. If no avail, send
more...
to the 900MHz range and has VHF/UHF/FM/AM/CB/WX/AIR scanning capabilities. It even comes pre-programmed with international channels. It also has an automatic Weather Alert Notifier
Bank already programmed into its internal memory. In short, the K500 is the ultimate scanner. However it will be hard to find because Regency went
more...
1. If you mean on "
bank" of channels, then you have locked out the others. To unlock them, place the scanner in "scan" mode & press each button that corresponds
more...
Sponsored Links