...up all my basic cable channels. I can only get about 12-16 channels. Bought TV used. No remote or owners manual; Check the menu setting to see if it's set to antenna rather than cable.(setup
Question about Emerson Televison & Video
my tv is setup for box need to switch back to basic without remote Without the remote for this brand impossible.
Question about Mitsubishi Televison & Video
...basic through remote control on vs-40503 model Direct Code EntryPress and hold the SETUP button until the red indicator stays on, then release the SETUP button. Press and release the desired Mode ...
...reception of TV programs broadcast in stereo. Use a stereo cable Go into the setup menu,select basic settings, select audio & change settings. The set will play stereo when it has a stereo
basic cable, no box just the wire hook up. When the tv is turned on, it gets the one channel. When you push the remote or the tv channel to change channels up or down, it only goes to Input 1 or Input
...setup it is very basic just color,contrast and tilit that type of thing. No pincushon or anyhting any info would be great thanks for the help! Mis-shaped pix is often a bad capacitor in scan circuit ...
...basic cable channels to my tv. It has the blue picture and the tv is connected to the cable wall. How do I tune in the channels. I do not understand my remote control. I do not see a input or output ...
...basic setup screens. Channel setup V-Chip Setup Caption ect. Using the Volume + and - along with the Channel up (+) and down(- ) key's, will give you all the adjustments you may need without a remote ...
...setup menu, next to channel 91, it says clear. I just bought the same TV second-hand and had the same problem. Solution: Use remote to change channel to 00. You can't display channel 00 using front ...
30 questions posted
Usually answered in minutes!
422 Questions
267 Questions
265 Questions
155 Questions
150 Questions