when i put a tape it ejects again This indicates a tape end sensor problem, the sensor will need to be replaced.
end in ff or rw Either the autostop sensor is gummed (Sometimes easy to fix, sometimes needs to be replaced) or the IC tape controller is not listening to the sensor. In either case, you'll need to be
rosen a7 car dvd player keeps ejecting any dvd all in one system a7 keeps ejecting the dvd cds any format what is called the end sensor thats got tobe replaced
sometimes the audio stops during the movie and I have to turn it off and reload the movie there a laser sensor, is end of life, must be replaced, send to repair.
HOW TO REPLACE A VCR UNIT THE VIDIO RUNS FOR SEVERAL SECONDS THEN STOPS AND UNLOADS The problem is a tape end sensor issue, or the tape up reel is not turning, remove top to verify.
end of a flat spoon handle and tissue wrapped around you are able to clean the sensor. Only a mother whose child is upset that his DVD doesn't work, would come to this kind of solutions, but it worked
...end of the actuator should be a switch. You can try to spray some cleaner into the switch, and then work it. If this doesn't work, you could replace it but you would need to know soldering. Also, you ...
end towards its lens, at about one feet away from it, and press each button on the remote control. If there is infrared emission from it, you can see its image on cellphone camera screen. If not check
...end. Break open the remote and desoder the LED diode note the arrow (if on the curcit board) should be pointing to the larger peace of metal in the plastic. Now the hard part 3 screws remove cover, ...
Question about Coby Televison & Video
...end of the swab. Step6Give the lens a few seconds to dry and replace the covering of the DVD player. Test the efficiency of the player. If necessary, repeat the process. ...
13 questions posted
Usually answered in minutes!
1,061 Questions
920 Questions
867 Questions
724 Questions
662 Questions