Philips MS3250C 32" TV "led horizontal lines" Questions

...sound is coming and it goes to stanby.the LED blinks for few seconds then goes off. no line flyback transformer vertical line horizontal out put circuit horizontal line vertical output circuit at ...

...led flashing red green after horizontal output nec pf-68v21 pwr led flashing red green after horizontal output tran change. power supply 120, 5, 12 and 20v ok. no heater so no horizontal oscilation ...

...led sty0632 has no picture or sound and horizontal line on the right Check and replace damaged component/s at its horizontal scan output section circuit. Check the LOT (Line Output Transformer) too ...

...horizontal scan output transistor. Check the input voltage to LOT. If the voltage is absent check the feeder resistor; if any. If you wish to get some details; check the site linked here. Surf the ...

...led moved from one dresser to next. worked fine until I moved it. now black and grey screen with black horizontal and white vertical lines The connections are not fixed properly. Tighten or replace ...

...and flashes the led 3,2,1. I have the Philips 27PT6441/37 TV that turns on to the point of hearing sound then instantly turns off and flashes the led 3,2,1. Plus horizontal lines on top of the ...

Horizontal Lines across the screen, but no picture. The audio works. The Red timer LED flashes continuously. With the back of the case removed I can hear a static noise around the tube. I also noticed

LED H/OUT & H PIN OUT TOO HOT IT SHORTS AFTER 1O MINIUTES Check and replace all the non-electrolytic capacitors at the horizontal output section circuit. If LDT [Line Driver Transformer] or line drive

...horizontal line through the tv with no picture no picture, line through the tv and we do have sound By now you've probably replace this with a Flat Screen LCD, LED or Plasma unit. But the answer to ...

...LED keeps blinking Check and replace damaged component/s at its horizontal scan output section circuit. Check the LOT (Line Output Transformer) too for damage. Replace the horizontal scan output ...