Meade ETX-125PE (500 x 127mm) Telescope "motor" Questions

Elevation motor stopped working.... My lx90 scope was working fine until the other night and the elevation motor stopped...the hand box indicated that the motor was not working. I reset the system, ...

Motor unit fault DS 2000 I have inserted new batteries, balanced the tube but I still get an error message,"Motor unit fault". I have done everything possible but the motor just does not work. Please ...

C10-NGT RA+DEC clamps and the motors Hey, I have a question for you guys. I have a feeling it's going to be obvious. When using the motors in the C10-NGT reflector telescope model, do the RA and DEC ...

MotorFault I recently purchased an etx-125pe on first use everything was fine and then when i tried to use it again fault code appeared testing motors. Now when i switch on autostar it allows me to ...

Vixen Telescope DD-1 Dual Motor Controller for RA and Declination The DD-1 controller does not drive the declination motor at the same speed as the right ascension motor. The 1.5X, 2x, and 32 X speeds

Meade DS 2000 Goto Reflector scope. I am looking for the base goto motor assembly housing witch houses the motor and gears. Can anybody please help? You cannot actually get parts for this scope other ...

cg5 gt dec motor broken Can you hear the motor running even though the axis does not move? If it is, then all that is possibly needed is to realign the motor on its mounting with the driven gear of ...

60at motor fault etx-60at motor fault at startup Could be several things: You did Train the drives and CALIBRATED motors using the same power source you will use outside? Do not run off of the ...

...responing. the down is working only. After initializing and fining north the auto star says stalled motor. Do a calibrate motors and make sure you are using a separate 12 volt power pack or BRAND NEW ...

... the liberal use of grease and the quality of machining of the main DEC and RA gears. 1. Remove the motors from the telescope. Be careful when removing either motor as there is a compression spring ...