Philips Magnavox 20MS233S 20" TV "batteries leaking" Questions

I changed the batteries in my phillips universal remote and when I did it would not work. I have a magnavox tv but I do not have the code or know the steps to fix it You shouldn't have to do anything ...

my 32"toshiba keeps changing from tv ,to video 1, to video 2 its been almost over 7 hours since this started,,,changed the batterys on remote and its still doing the same thing It's one or more ...

Remote won't work with tv. I have a Sanyo DS27930 tv and the remote hasn't had the batteries in it for a while. I just put new ones in but it won't work with the tv. Is there a code to pair the remote

...batteries standing on end) and see if you notice any with bulging ends or leaking some fluid (it will look like battery acid). If you find this, then you've found your culprit and a $5 shopping spree ...

...original Toshiba remote, it obviously should work the TV. Have you checked to make sure it has good batteries? Also, if old batteries leaked in it at any time there may be corrosion on the battery ...

The batteries in my tv remote leaked and ruined my remote. The tv was currently on video mode and there is no button on the outside of the tv to switch it. I bought a universal remote to see if it ...

... where it is turning off the TV by emitting a signal of it's own. To verify this, simply remove the batteries and turn the TV on. If it stays on, that was the problem and you would need a new remote. ...

...standby when faults appear , often its capacitors in power supply that fail, they usually go like batteries and leak. You can sometimes spot them ( with a trained eye) they swell up .... but not a ...

...batteries in the remote need to be replaced I had a similar problem with my Phillips 42 in. LCD HD TV. Here's the problem. The Power Supply Board. I opened my TV up(warranty was up of course) and ...

...a Mitsubishi CS-27XM1 TV from a friend who recently upgraded. First off, the remote does not work. Batteries were replaced and checked internals for bad contacts etc. Not sure how to check if IR is ...