Philips Magnavox 27MS343S 27" TV "old phillips turned red" Questions

...old one properly.You can look in your manual how to change the bulb,that way you can pull it out and check it,see if theres any discolorations or broken pieces in it.You might only need a Phillips ...

old phillips remote that allows us to change channels by the up and down arrows and the same with the volume and we can turn it off and on but cannot enter the 0000 or 0711 code. We have tried turning

Phillips tv. I agree, this set has been garbage. Everyone needs to go back to making a quality product since they charge quality prices! The same issue: 6 slow blinks, 1 fast blink... crt issue.. cost

...Phillips screwdriver and slide it out and away from the TV. Remove the screws on the lamp assembly and slide it out of the TV. Disconnect the old lamp and insert a new lamp into the assembly. Slide ...

phillips screw driver is all that's necessary. When you have the boards exposed to view, notice on the left center of the convergence board ( the convergence board had 2 large ( large being 3X4 inches

phillips screw driver is all that's necessary. When you have the boards exposed to view, notice on the left center of the convergence board ( the convergence board had 2 large ( large being 3X4 inches

...phillips screwdriver. this will shake the old sediments in the crt. the tv will probably shut off if you do it right. tap harder and harder many times. fixed. two, rejuvinate the picture tube. fixed. ...