E-Machines T1090 PC Desktop "added memory recognize" Questions

memory on this older pc or do I have a possibly bad module. Hi there Your t1090 will only accept a maximum chip size of 256Mb and so it will not accept the added the 512mb chip as it cannot handle it.

eMachine W3507, will not boot after adding 2GB of memory. (2x 1GB; one in each slot). It will boot with one stick, but only if the original 512MG is in slot 1. The 512MB is not recognized. Where they ...

added memory. If you have 2- 1GB sticks, try both , one at a time. Your system spec's and manual tell nothing which dimm banks are suppose to be used , and if you can install 2-1GB sticks, all it says

...added memory is not recognized. I checked the BIOS and it only shows 512MB DDR SDRAM installed with speed 400MHz. The newly added memory is PC3200 DDR 400MHz. I removed the CMOS battery and ...

...recognize the 512MB memory I installed in 1out of 2 slots that exist. THe other slot has the existing 64MB memory stick in it. THe 512MB is a Kingston PC100 DIMM that I got today and I am adding this ...

...memory so i added another 512 memory stick but i still get the same message. Hi, First make sure your new stick of RAM is being recognized. If you dont get it seated well, it could not really be ...

...added 2gb module in memory slot one, color coded white, and added 2gb module slot 3, also color coded white. only 2 gb recognized by computer, the second module is not recognized. Has anybody had the ...

...added the right type of memory. also look at your user manual. it should tell you where and how to place the added sticks. sometimes they have to be added in pairs or have to be in specific slots. ...

...recognize the last memory slot in my FX4710 I upgraded my memory and discovered the computer is not recognizing the last memory slot. I have three 2G sticks in the first three slots for 6G but no ...

...recognize or reject this module. My Toshiba laptop had this memory module added to it but my system does not recognise it. I have XP . The new memory MUST be the same type as what is already in